Radar and PIR Motion Sensor LED Bulkhead Light
A moisture proof surface mounted light with a built in radar or infrared motion sensor, single layer white PP lens, and SMD2835 chips. Automatic on/off operation for wall or ceiling installation, in round and ellipse bodies with black or white frames.
Full Specifications
| Shape | Power | Lumens | Size | Materials | Frame Color |
|---|---|---|---|---|---|
| Round | 24W | 1600 LM | Ø220 x 70mm | PP | Black / White |
| Ellipse | 24W | 1600 LM | 260 x 140 x 75mm | PP | Black / White |
Product Views
Built In Motion Detection
A radar or passive infrared sensor is built directly into the lens face, switching the fixture on automatically when motion is detected and off after a preset delay. This removes the need for a separate manual wall switch or a standalone sensor module wired in line, simplifying both the bill of materials and the installation on a corridor or stairwell run.
Why This Fixture Works Well
Automatic Operation
Motion triggered switching reduces energy waste in low traffic areas compared to a fixture left on continuously or controlled by a standard wall switch.
Single Layer White Lens
A plain white PP lens diffuses the SMD2835 output evenly, giving a clean, unobtrusive appearance suited to corridors and utility spaces.
Full PP Construction
Housing and lens are both PP plastic, chosen for moisture resistance in damp locations over metal components prone to corrosion.
Two Shapes, One Spec
Round and ellipse bodies share the same 24W and 1600LM output, simplifying planning across a mixed shape project.
Wall or Ceiling Mounted
The same surface mounted body installs flat against a wall or flush to a ceiling without a separate SKU per position.
Black or White Frame
Frame color can match the mounting surface for a low profile look, or contrast against it as a visible design choice.
Where This Fixture Is Typically Installed
- Stairwells and corridors: Automatic switching reduces energy use in low traffic transit spaces across hotels, apartments, and office buildings.
- Parking structures and covered garages: Motion detection provides light on demand across long unattended runs.
- Storage rooms and utility areas: Removes the need for a manual switch in spaces visited briefly and infrequently.
- Balconies and covered walkways: Moisture resistant PP housing suited to sheltered exterior locations with occasional foot traffic.
- Villa entrances and service corridors: Automatic operation adds a practical security and convenience function to standard wall or ceiling lighting.
Frequently Asked Questions
Is the sensor radar or infrared?
Both radar and PIR sensor options exist in this category. Confirm which technology is used on this specific model with the supplier, as detection behavior differs between the two.
Can the sensor be disabled for manual control?
Sensor override or manual mode availability should be confirmed with the supplier, as this depends on the specific driver and sensor module used.
Can this fixture be mounted on both walls and ceilings?
Yes, it is a surface mounted fixture designed for either wall or ceiling installation using the same body.
What is the housing made from?
Both the housing and lens are PP, polypropylene, in a single layer construction.
Is this fixture suitable for outdoor use?
The PP housing is moisture resistant and suited to damp or sheltered locations. Confirm the specific IP rating with the supplier before specifying it for fully exposed outdoor installation.
Requesting a Quotation or Sample
For MOQ confirmation, FOB pricing, sensor specification, shape or frame color options, or OEM packaging, contact the sales team with your target quantity and destination port.
Reviews
There are no reviews yet.