UD95 LED SMD Recessed Downlight | DOB Driver on Board Ceiling Light, 7W to 24W, CB/IECEE/CE Certified
A plastic coated aluminum downlight with a DOB driver on board circuit and a PS light guide plate for even, shadow free light. Concealed recessed installation with spring clip mounting, available in four wattages from 7W to 24W and three color temperatures, with full CB, IECEE, and CE certification for export markets.
Full Specifications
| Power | Efficiency | Luminous Flux | PF / DF | Overall Size | Cutout |
|---|---|---|---|---|---|
| 7W | 80 LM/W | 560 LM | 0.5 / 0.7 | 2.5 inch, Ø110 x H45mm | Ø90mm |
| 10W | 80 LM/W | 800 LM | 0.5 / 0.7 | 3.5 inch, Ø127 x H45mm | Ø100mm |
| 18W | 80 LM/W | 1440 LM | 0.5 / 0.7 | 5 inch, Ø160 x H55mm | Ø140mm |
| 24W | 80 LM/W | 1920 LM | 0.5 / 0.7 | 8 inch, Ø220 x H55mm | Ø200mm |
| Input Voltage | AC 170 to 265V, 50/60Hz |
|---|---|
| Color Temperature | 3000K warm white, 4500K neutral white, 6500K daylight |
| Color Rendering Index | 80 Ra or higher |
| Light Source | SMD chip with PS light guide plate |
| Driver Type | DOB, driver on board |
| Body Material | Plastic coated aluminum housing |
| Installation Type | Concealed recessed mount with spring clips |
| Dimming | Not dimmable, standard wall switch control |
| Operating Temperature | Minus 20C to plus 50C |
| Energy Saving | Up to 85 percent versus halogen equivalents |
| Rated Working Life | 15,000 hours |
| Certifications | CB, IECEE, CE |
Product Views
Wattage Lineup
Build and Component Engineering
PC Reflector
A white polycarbonate reflector ring shapes the beam spread and gives the fixture a clean, unobtrusive face when installed flush with the ceiling.
PS Light Guide Plate
Spreads light from the SMD chip evenly across the lens surface, avoiding the visible dot pattern some SMD downlights show at close range.
SMD Chip
Surface mounted diode array delivering a consistent 80 LM/W across all four wattage options, which keeps brightness predictable when mixing wattages on one project.
Plastic Coated Aluminum Housing
An aluminum core provides the heat sink structure, with a plastic coating over the housing for a lighter overall weight and a finished exterior appearance.
DOB Design with SMD Light Source
Driver on Board (DOB)
The driver circuit is built directly onto the same PCB as the LED chips instead of a separate driver box, shortening the electrical path and reducing the overall fixture depth.
Fewer Failure Points
With no remote driver enclosure or connecting harness, there is one less connection point where a poor solder joint or loose wire can cause a field failure.
Compact Recessed Depth
DOB construction keeps the fixture body shallow, useful where ceiling void depth above the cutout is limited.
Spring Clip Installation
Tool free spring clips secure the fixture into the cutout from below, speeding up installation across large ceiling grids.
Because the driver components and SMD chips share the same thermal zone in a DOB design, the aluminum core inside the plastic coated housing is sized to carry heat away from both, which is why the housing construction matters more here than on a fixture with a remote driver box.
Why the UD95 Performs Well in the Field
Consistent Efficiency
80 LM/W holds steady across 7W, 10W, 18W, and 24W, simplifying lumen calculations when specifying mixed wattages on one floor plan.
Light Weight Housing
The plastic coated aluminum body is lighter than an all metal housing of the same size, easing handling during large volume installation.
Accurate Color Rendering
CRI 80 Ra or higher keeps colors looking natural under the light rather than washed out.
Wide Ambient Range
Rated from minus 20C to plus 50C, suitable for ceiling voids and storage conditions that see significant heat buildup.
Three Color Temperatures
3000K, 4500K, and 6500K from one product line covers warm hospitality through daylight retail and office use.
Wide Wattage Range
7W to 24W covers small residential rooms through larger commercial ceiling grids from one product family.
Voltage Compatibility, Please Note
Built for High Ambient Temperature Regions
Thermal Performance in Hot Climates
Ceiling voids without direct air conditioning, rooftop storage, and unshaded warehouse staging can all push ambient temperature well past normal room conditions before a fixture is even installed. The UD95’s aluminum core is sized to hold the SMD chips and on board driver within safe operating temperature through this range.
Certifications and Market Access
Current Certifications
CB Certificate and IECEE: Testing follows IEC 60598 under the CB Scheme, and because the scheme works on mutual recognition, the test report can be presented to national certification bodies in over 50 member countries instead of repeating full safety testing in each destination market.
CE Marking: Confirms compliance with the EU Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU, required for legal sale across the EU, Norway, Iceland, Liechtenstein, and Switzerland.
Order Information
The fields below are placeholders. Please confirm exact figures with the supplier before issuing a purchase order.
| Minimum Order Quantity | [Insert MOQ, e.g. 500 to 1,000 pcs per model/wattage] |
|---|---|
| Sample Availability | [Insert sample lead time and cost] |
| Production Lead Time | [Insert lead time after deposit and sample confirmation] |
| Payment Terms | [Insert terms, e.g. T/T deposit, balance before shipment, L/C at sight] |
| Packaging | [Insert unit packaging and carton specification] |
| Loading Quantity | [Insert pcs per 20ft / 40ft container by wattage] |
| Warranty | [Insert warranty period] |
| Incoterms | [Insert available terms, e.g. FOB, CIF, EXW] |
OEM and ODM Options
- Private label packaging: Buyer branded carton and inner packaging for retail distribution.
- Custom color temperature ratio: Fixed single CCT versions available alongside the standard three option range.
- Logo and marking: Laser or silk screen marking on the housing or driver label for qualifying order volumes.
Confirm minimum quantities and tooling costs for each customization option directly with the supplier.
Where the UD95 Is Typically Installed
- Hotels and corridors: 3000K or 4500K where a low profile flush ceiling finish is required.
- Retail stores: 18W or 24W units at 4500K for even floor coverage across large sales areas.
- Offices: 10W or 18W at 4500K across a standard suspended ceiling grid.
- Restaurants and cafes: 3000K for a warm, low glare dining atmosphere.
- Residential interiors: 7W for hallways and closets, 10W for bedrooms, 18W for living rooms and kitchens.
- Large volume rollouts: Consistent 80 LM/W across all wattages simplifies lighting calculations when specifying multiple room types from one product family.
Frequently Asked Questions
What does DOB mean and why does it matter?
DOB stands for driver on board, meaning the driver circuit is integrated onto the same PCB as the SMD chips rather than housed in a separate box, keeping the recessed fixture body shallow and reducing wired connection points.
What is plastic coated aluminum housing?
The housing uses an aluminum core for heat dissipation with a plastic coating applied over the surface, giving a lighter weight than an all metal housing while retaining the aluminum’s thermal performance.
Can the UD95 be dimmed?
No, the standard UD95 is not dimmable and is designed for on and off wall switch control.
What ceiling cutout size does each wattage need?
7W needs Ø90mm, 10W needs Ø100mm, 18W needs Ø140mm, and 24W needs Ø200mm.
Is this fixture suitable for bathrooms or outdoor areas?
The UD95 carries an IP20 rating and is intended for dry indoor locations only.
Is SASO/SABER certification included?
SASO/SABER registration is handled separately from CB, IECEE, and CE. Please confirm current SASO/SABER status for this model with the supplier before placing an order intended for the Saudi market.
Why is the input voltage range 170 to 265V rather than a wider range?
This range covers standard 220V and 230V mains with normal fluctuation. Sites with voltage that can drop below 170V should confirm compatibility or ask about a wider range driver option.
Requesting a Quotation or Sample
For MOQ confirmation, FOB pricing by wattage, certification documentation, or OEM packaging options, contact the sales team with your target wattage mix and destination port.
Reviews
There are no reviews yet.