Rimless LED Panel Light,
Flush to the Ceiling — UP7R
UP7R drops the visible trim ring most downlights have, sitting flush against the ceiling for a cleaner, more architectural finish. Behind that flat face is an aluminum base cover for heat dissipation, a PC diffuser, and an SMD light engine reaching up to 110LM/W efficacy — well above a standard downlight’s typical 70-80LM/W. Each wattage also accepts a wide range of existing cut-out sizes, which matters if you’re replacing older downlight housings rather than starting from a fresh hole. Offered in 9W–48W, with OEM/ODM support for importers, distributors and lighting contractors.
Datasheet at a Glance
Everything a buyer checks first — design, materials, driver behavior and optics — before requesting samples. Wattage-specific output figures and cut-out ranges are listed further down.
One Fixture, a Wide Range of Existing Hole Sizes
Fresh installs aren’t the only use case for a downlight — a lot of orders are for replacing older, failing fixtures without redoing the ceiling. UP7R’s spring-loaded mounting arms are built to grip a broad span of existing cut-outs per wattage: the 36W version, for example, covers anywhere from Φ50mm to Φ190mm. That’s a wide enough range to fit most legacy downlight housings without cutting a new hole, which is worth confirming against your specific retrofit spec before ordering in volume.
A Flush Finish With Retrofit Flexibility
Rimless / Trimless Finish
No visible trim ring around the cover — the fixture sits flush against the ceiling for a cleaner architectural look, popular in hospitality and modern residential fit-outs.
Up to 110LM/W Efficacy
The 36W and 48W versions reach 110LM/W, ahead of the 70-80LM/W typical of standard SMD downlights — more light output per watt drawn on the circuit.
Aluminum + PC Build
An aluminum base cover handles heat dissipation while a PC front cover keeps the fixture lightweight — a lighter, more shippable alternative to a full-aluminum body.
15°–45° Beam Angle
A narrower beam range than most flat panel lights, giving more directional control over where the light lands — useful for accenting rather than flooding a room evenly.
What’s Inside the Fixture
Three components a technical buyer usually asks about before approving a spec sheet.
Plastic Cover
A PC front cover diffuses the SMD source for even output while keeping the visible face free of a raised trim ring, for the rimless look.
SMD Chip
The SMD light source sits directly behind the cover, delivering the fixture’s rated efficacy of up to 110LM/W depending on wattage.
ALU Base Cover
An aluminum base plate on the rear handles heat dissipation and carries the spring-loaded mounting arms used for installation.
Wattage & Output Comparison
UP7R is available in 9W, 18W, 24W, 36W and 48W. The Cut-Out column shows the range of existing hole sizes each wattage can accommodate.
| Power | Efficacy | Luminous Flux | PF/DF | Overall Size | Cut-Out Range |
|---|---|---|---|---|---|
| 9W | 90 LM/W | 810 LM | 0.5/0.7 | Φ100×H17mm | Φ50–70mm |
| 18W | 100 LM/W | 1800 LM | 0.5/0.7 | Φ120×H17mm | Φ50–95mm |
| 24W | 100 LM/W | 2400 LM | 0.5/0.7 | Φ170×H17mm | Φ50–140mm |
| 36W | 110 LM/W | 3960 LM | 0.9/0.9 | Φ220×H17mm | Φ50–190mm |
| 48W | 110 LM/W | 5280 LM | 0.9/0.9 | Φ300×H17mm | Φ50–190mm |
Cut-out ranges as supplied by the factory spec sheet — please confirm against your specific retrofit application before placing a bulk order.
What You’ll Need for a Sourcing Decision
The details that usually come up between a first sample request and a container order. Exact figures depend on wattage, CCT mix and destination — confirm with our sales team for a formal quotation.
Samples
Pre-production samples available for testing and photometry verification prior to bulk order confirmation.
OEM / ODM
Custom housing color, packaging branding and CCT selection available for private-label programs.
Lead Time
Typical production lead time runs from sample confirmation to shipment; exact scheduling depends on order volume and season.
Packaging & Shipping
Export-standard carton packaging with drop-test protection; FOB/EXW/CIF terms available on request.
Master Carton Dimensions by Wattage
For container load planning — confirm units per carton and total container quantity with our sales team for your order size.
Where UP7R Is Typically Specified
A flush, rimless finish plus a wide cut-out range suit both new architectural fit-outs and retrofit replacement of existing downlight fixtures.
Questions Buyers Usually Ask
Is there an LED downlight that fits multiple existing cut-out sizes for a retrofit job?
Yes — UP7R’s spring-loaded mounting arms are built to grip a wide span of existing hole sizes per wattage rather than one fixed diameter, which is intended to make it easier to swap into legacy downlight housings without cutting a new hole. Confirm the exact range against your project’s cut-outs before ordering in volume.
What does “rimless” actually mean on this fixture?
UP7R has no raised trim ring around the visible face — the cover sits flush with the ceiling surface for a cleaner, more architectural look compared to a downlight with a visible bezel.
Why is the efficacy higher than a standard SMD downlight?
The 36W and 48W versions are rated up to 110LM/W, compared with the 70-80LM/W typical of a standard SMD downlight in our range — meaning more usable light output for the same electrical input at these wattages.
Is UP7R dimmable?
The standard version is non-dimmable. A dimmable driver can be arranged as a custom option — let us know your dimming protocol (TRIAC, 0-10V, DALI) when requesting a quote.
Do you support OEM/ODM and small trial orders?
Yes — branding, housing color and CCT can be discussed for private-label programs. Contact our sales team with your target quantity and we’ll confirm MOQ, sample lead time and pricing.
What payment terms and trade terms are available?
T/T and L/C are commonly used, with FOB, EXW or CIF shipping terms depending on your destination port. Get in touch for a formal proforma invoice.
Request a Quotation for UP7R
Reach out for the full datasheet, cut-out range chart, and FOB/EXW pricing by wattage and order quantity.