UD95L LED SMD Downlight with PC Lens | DOB Driver on Board Recessed Ceiling Light, 7W to 24W, CB/IECEE/CE Certified
A plastic coated aluminum SMD downlight with a DOB driver on board circuit, a black anti glare reflector cup, and a PC lens for a tighter, more focused beam than a standard reflector only design. Concealed recessed installation with spring clip mounting, available in four wattages from 7W to 24W, with full CB, IECEE, and CE certification.
Full Specifications
| Power | Efficiency | Luminous Flux | PF / DF | Overall Size | Cutout |
|---|---|---|---|---|---|
| 7W | 80 LM/W | 560 LM | 0.5 / 0.7 | 2.5 inch, Ø110 x H45mm | Ø90mm |
| 10W | 80 LM/W | 800 LM | 0.5 / 0.7 | 3.5 inch, Ø127 x H45mm | Ø100mm |
| 18W | 80 LM/W | 1440 LM | 0.5 / 0.7 | 5 inch, Ø160 x H55mm | Ø140mm |
| 24W | 80 LM/W | 1920 LM | 0.5 / 0.7 | 8 inch, Ø220 x H55mm | Ø200mm |
| Input Voltage | AC 170 to 265V, 50/60Hz |
|---|---|
| Color Temperature | 3000K warm white, 4500K neutral white, 6500K daylight |
| Color Rendering Index | 80 Ra or higher |
| Light Source | SMD chip with PC lens |
| Driver Type | DOB, driver on board |
| Body Material | Plastic coated aluminum housing |
| Installation Type | Concealed recessed mount with spring clips |
| Dimming | Not dimmable, standard wall switch control |
| Operating Temperature | Minus 20C to plus 50C |
| Energy Saving | Up to 85 percent versus halogen equivalents |
| Rated Working Life | 15,000 hours |
| Certifications | CB, IECEE, CE |
Product Views
Wattage Lineup
Build and Component Engineering
PC Reflector
A black polycarbonate reflector cup surrounds the light source, cutting glare and giving a defined, higher contrast cutoff compared to a white reflector.
PC Lens
A polycarbonate lens sits directly over the SMD chip to shape and narrow the beam, giving more directional control than a reflector alone.
SMD Chip
A surface mounted diode array paired with the lens gives a defined beam edge useful for accent lighting, delivering 80 LM/W efficiency across the wattage range.
Plastic Coated Aluminum Housing
An aluminum core provides the heat sink structure, with a plastic coating over the housing for a lighter overall weight and a finished exterior appearance.
DOB Design with SMD Chip and Lens Optics
Driver on Board (DOB)
The driver circuit is built directly onto the same board as the SMD chip instead of a separate driver box, shortening the electrical path and reducing the overall fixture depth.
Fewer Failure Points
With no remote driver enclosure or connecting harness, there is one less connection point where a poor solder joint or loose wire can cause a field failure.
Lens Controlled Beam
Adding a PC lens over the SMD chip narrows the beam angle compared to a reflector only design, giving a more defined pool of light on the floor or wall.
Black Anti Glare Cup
The black reflector cup reduces visible brightness when viewed off axis, useful where the fixture sits within normal eye line.
Because the driver components and SMD chip share the same thermal zone in a DOB design, the aluminum core inside the plastic coated housing is sized to carry heat away from both, which matters more here than on a fixture with a remote driver box.
Why the UD95L Performs Well in the Field
Focused Beam Control
The lens over the SMD chip produces a more defined beam edge than a reflector alone, useful for highlighting displays, artwork, or architectural features.
Consistent Efficiency
80 LM/W holds steady across 7W, 10W, 18W, and 24W, simplifying lumen calculations when mixing wattages on one project.
Accurate Color Rendering
CRI 80 Ra or higher keeps colors looking natural under the light rather than washed out.
Wide Ambient Range
Rated from minus 20C to plus 50C, suitable for ceiling voids and storage conditions that see significant heat buildup.
Three Color Temperatures
3000K, 4500K, and 6500K from one product line covers warm hospitality through daylight retail and office use.
Light Weight Housing
The plastic coated aluminum body is lighter than an all metal housing of the same size, easing handling during large volume installation.
Voltage Compatibility, Please Note
Built for High Ambient Temperature Regions
Thermal Performance in Hot Climates
Ceiling voids without direct air conditioning, rooftop storage, and unshaded warehouse staging can all push ambient temperature well past normal room conditions before a fixture is even installed. The UD95L’s aluminum core is sized to hold the SMD chip and on board driver within safe operating temperature through this range.
Certifications and Market Access
Current Certifications
CB Certificate and IECEE: Testing follows IEC 60598 under the CB Scheme, and because the scheme works on mutual recognition, the test report can be presented to national certification bodies in over 50 member countries instead of repeating full safety testing in each destination market.
CE Marking: Confirms compliance with the EU Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU, required for legal sale across the EU, Norway, Iceland, Liechtenstein, and Switzerland.
Order Information
The fields below are placeholders. Please confirm exact figures with the supplier before issuing a purchase order.
| Minimum Order Quantity | [Insert MOQ, e.g. 500 to 1,000 pcs per model/wattage] |
|---|---|
| Sample Availability | [Insert sample lead time and cost] |
| Production Lead Time | [Insert lead time after deposit and sample confirmation] |
| Payment Terms | [Insert terms, e.g. T/T deposit, balance before shipment, L/C at sight] |
| Packaging | [Insert unit packaging and carton specification] |
| Loading Quantity | [Insert pcs per 20ft / 40ft container by wattage] |
| Warranty | [Insert warranty period] |
| Incoterms | [Insert available terms, e.g. FOB, CIF, EXW] |
OEM and ODM Options
- Private label packaging: Buyer branded carton and inner packaging for retail distribution.
- Custom color temperature ratio: Fixed single CCT versions available alongside the standard three option range.
- Custom beam angle: Alternate lens options can be discussed for qualifying order volumes where a narrower or wider beam is required.
- Logo and marking: Laser or silk screen marking on the housing or driver label for qualifying order volumes.
Confirm minimum quantities and tooling costs for each customization option directly with the supplier.
Where the UD95L Is Typically Installed
- Retail and showroom accent lighting: 18W or 24W units at 4500K where the lens controlled beam highlights merchandise or displays.
- Hotels and lobbies: 3000K where a defined, higher contrast beam adds visual depth to a space.
- Galleries and feature walls: High CRI SMD output with lens control makes color and texture read accurately under a focused beam.
- Offices with feature lighting needs: 10W or 18W at 4500K for accent zones within a standard ceiling grid.
- Restaurants and cafes: 3000K in accent positions over tables or feature walls.
- Residential interiors: 7W or 10W for highlighting artwork, shelving, or architectural details.
Frequently Asked Questions
How does the PC lens change the beam compared to a reflector only downlight?
The lens sits directly over the SMD chip and narrows the beam angle, producing a more defined pool of light rather than the broader spread typical of a reflector only design.
What does DOB mean and why does it matter?
DOB stands for driver on board, meaning the driver circuit is integrated onto the same board as the SMD chip rather than housed in a separate box, keeping the recessed fixture body shallow.
What is plastic coated aluminum housing?
The housing uses an aluminum core for heat dissipation with a plastic coating applied over the surface, giving a lighter weight than an all metal housing while retaining the aluminum’s thermal performance.
Can the UD95L be dimmed?
No, the standard UD95L is not dimmable and is designed for on and off wall switch control.
What ceiling cutout size does each wattage need?
7W needs Ø90mm, 10W needs Ø100mm, 18W needs Ø140mm, and 24W needs Ø200mm.
Is this fixture suitable for bathrooms or outdoor areas?
The UD95L carries an IP20 rating and is intended for dry indoor locations only.
Is SASO/SABER certification included?
SASO/SABER registration is handled separately from CB, IECEE, and CE. Please confirm current SASO/SABER status for this model with the supplier before placing an order intended for the Saudi market.
Requesting a Quotation or Sample
For MOQ confirmation, FOB pricing by wattage, certification documentation, or OEM packaging options, contact the sales team with your target wattage mix and destination port.