Up-Down LED Wall Light,
Built for Villa & Facade Lighting
A black ABS wall sconce that throws a crisp, lensed cluster beam both up and down the wall — the layered, architectural light effect specified for villa entrances, courtyard walls and hospitality facades across the Middle East and North Africa. The range comes in two housing profiles, a soft Rounded silhouette and a sharper Faceted diamond-edge silhouette, both sharing the same SMD2835 light engine and offered in 2-head, 3-head and 4-head configurations (4W / 6W / 8W). Surface-mounted, no cutting required. OEM/ODM support is available for importers and distributors.
Datasheet at a Glance
Shared across both housing profiles — light source, materials, beam behavior and installation — before requesting samples.
| Configuration | Power | Size (mm) | Material | Frame Color |
|---|---|---|---|---|
| 2-Head | 4W | 130×80×40mm | ABS | Black |
| 3-Head | 6W | 165×80×45mm | ABS | Black |
| 4-Head | 8W | 205×80×45mm | ABS | Black |
The size and power table applies identically to both the Rounded and Faceted housing profiles below.
Two Silhouettes, One Beam Language
Both profiles share the identical light engine, lens design and power options — the choice comes down to which outline better suits your facade’s architectural language.
Rounded Housing
A soft, bubble-edged silhouette with smoothly rounded lens clusters — a quieter, more contemporary outline that reads well against both plaster and stone facades.
2-Head
130×80×40mm — compact spacing for pillars and narrower wall sections.
3-Head
165×80×45mm — balanced coverage for standard villa walls.
4-Head
205×80×45mm — the widest beam spread for feature walls and entrances.
Faceted Housing
The same lens layout in a sharper, diamond-edged outline — a more angular silhouette for projects specified with a crisper, more geometric facade aesthetic.
2-Head
130×80×40mm — compact spacing for pillars and narrower wall sections.
3-Head
165×80×45mm — balanced coverage for standard villa walls.
4-Head
205×80×45mm — the widest beam spread for feature walls and entrances.
Architectural Light Effect, Straightforward Installation
Lensed Cluster Beam
Each light source sits behind a dedicated lens that shapes the output into a crisp, focused beam rather than a soft wash.
Black ABS Housing
A durable, weather-resistant ABS body in a matte black finish, offered in two outlines so one spec sheet covers two facade aesthetics.
SMD2835 Chip
A widely used, reliable SMD chip that balances brightness and efficiency across every configuration and housing profile.
Surface-Mount Installation
Mounts directly onto the wall face with a simple back plate — no recess or cutting required, on either housing style.
Why the Cluster Lens Effect Reads as “Premium”
Focused, Not Flooded
A diffused wash lights a wall evenly but flatly. A lensed cluster beam creates visible light and shadow — the layered look associated with higher-end architectural and landscape lighting design.
Dual-Side Symmetry
Light projects both up and down from the same fixture, framing the wall section above and below the light rather than lighting only one direction.
Consistent Across Both Profiles
The same lens geometry and beam pattern is used on the Rounded and Faceted housings alike, so a facade lit with a mix of styles still reads as one coherent design.
What You’ll Need for a Sourcing Decision
The details that usually come up between a first sample request and a container order. Exact figures depend on configuration mix and destination — confirm with our sales team for a formal quotation.
Samples
Pre-production samples available for testing and beam pattern verification prior to bulk order confirmation.
OEM / ODM
Custom packaging branding and housing profile / configuration mix available for private-label programs.
Lead Time
Typical production lead time runs from sample confirmation to shipment; exact scheduling depends on order volume and season.
Packaging & Shipping
Export-standard carton packaging with drop-test protection; FOB/EXW/CIF terms available on request.
Where This Fixture Is Typically Specified
Villa Facades
Hospitality Exteriors
Courtyard Walls
Retail Storefronts
Perimeter Walls
Entrances & Pillars
Questions Buyers Usually Ask
What’s the actual difference between the Rounded and Faceted housings?
Only the outer silhouette — one has smoothly rounded lens clusters, the other a sharper diamond-edge outline. The light engine, lens design, beam pattern, power options and dimensions are identical between the two.
How is the 2-head, 3-head and 4-head power rating assigned?
Power scales with the number of light clusters — 4W on the 2-head version, 6W on the 3-head, and 8W on the 4-head, on both housing profiles.
Is this fixture rated for outdoor / exterior use?
It’s built for exterior wall applications with a sealed ABS housing and plastic lens cover. Let us know your destination market and required certification, and we’ll confirm the exact IP rating and test documentation available for that configuration.
Can the two housing styles be mixed on one project?
Yes — since both share the same beam design and dimensions, some projects specify one profile for the main facade and the other for a secondary elevation to create subtle visual variation.
Do you support OEM/ODM and small trial orders?
Yes — branding, packaging and configuration mix can be discussed for private-label programs. Contact our sales team with your target quantity and we’ll confirm MOQ, sample lead time and pricing.
What payment terms and trade terms are available?
T/T and L/C are commonly used, with FOB, EXW or CIF shipping terms depending on your destination port. Get in touch for a formal proforma invoice.
Request a Quotation for This Wall Light
Reach out for the full datasheet, beam photometry, and FOB/EXW pricing by housing style, configuration and order quantity.
Reviews
There are no reviews yet.