Crystal Faceted RGB Bulkhead Light
Round and Ellipse Crystal LED Bulkhead Light with RGB Edge Ring | SMD2835, Sparkling Faceted Lens, Wall and Ceiling Mounted
A moisture proof surface mounted light with a faceted crystal lens that scatters the SMD2835 light source into a diamond like sparkle, paired with a customizable RGB ring around the frame. Available in round and ellipse bodies with black or white frames, for wall or ceiling installation.
Full Specifications
| Shape | Power | Lumens | Size | Materials | Frame Color |
|---|---|---|---|---|---|
| Round | 24W + 24W | 1600 LM | Ø215 x 50mm | PP | Black / White |
| Ellipse | 24W + 24W | 1600 LM | 260 x 140 x 50mm | PP | Black / White |
Product Views
RGB Ring in Action
The edge ring runs on its own circuit and can be set to a range of colors independent of the white front panel, shown here in red and blue on the black frame versions.
Two Light Zones, One Fixture
Crystal Front Panel, 24W
The faceted PP lens breaks the SMD2835 output into a sparkling, multi point glint rather than a flat wash of light, giving the fixture a jewel like appearance even when viewed head on.
RGB Edge Ring, 24W
A ring of color runs around the frame perimeter on its own circuit, adjustable across the RGB range, so the accent color can be changed without affecting the white front panel.
Why This Fixture Works Well
Faceted Crystal Lens
The diamond cut lens texture scatters light into visible glints across the surface, giving a more decorative appearance than a plain flat diffuser.
Independent RGB Control
The ring circuit is separate from the front panel, allowing the accent color to be selected or changed for different rooms, occasions, or brand moments.
SMD2835 Light Source
A widely used, well proven LED chip package chosen for stable output and consistent color across production batches.
Full PP Construction
Housing and lens are both PP plastic, selected for moisture resistance in damp locations rather than metal components that can corrode over time.
Two Shapes, One Spec
Round and ellipse bodies share the same 1600LM output and dual 24W circuit design, simplifying planning across a mixed shape project.
Wall or Ceiling Mounted
The same surface mounted body installs flat against a wall or flush to a ceiling without a separate SKU for each position.
Where This Fixture Is Typically Installed
- Hotel lobbies and event spaces: RGB ring color matched to seasonal themes or brand colors, with the crystal front panel providing general light.
- Restaurants, bars, and lounges: Colored ring sets the mood while the sparkling front panel keeps the space functional.
- Retail feature walls: Crystal texture and color changing ring create a visual focal point near an entrance or display.
- Balconies and covered walkways: Moisture resistant PP housing suits sheltered exterior locations on either shape.
- Residential feature lighting: A decorative alternative to a plain bulkhead light in hallways, stairwells, or covered porches.
- Karaoke rooms, clubs, and entertainment venues: Full RGB range on the ring supports color changing effects to match music or lighting scenes.
Frequently Asked Questions
Can the RGB ring and white front panel be controlled separately?
The two zones run as separate 24W circuits. Independent control depends on the wiring and controller configuration used on site.
What causes the sparkling effect on the front panel?
The front lens uses a faceted, diamond cut PP surface that scatters the SMD2835 light into many small points rather than passing it through as a flat, even glow.
How is the RGB ring color controlled?
Control method, such as a remote, wall controller, or app, should be confirmed with the supplier, as this was not specified on the source sheet.
Can this fixture be mounted on both walls and ceilings?
Yes, it is a surface mounted fixture designed to install flat against a wall or flush to a ceiling using the same body.
What is the housing and lens made from?
Both the housing and the lens are PP, polypropylene, with the lens formed into a faceted crystal texture rather than a flat surface.
Is this fixture suitable for outdoor use?
The PP housing is moisture resistant and suited to damp or sheltered locations. Confirm the specific IP rating with the supplier before specifying it for fully exposed outdoor installation.
Requesting a Quotation or Sample
For MOQ confirmation, FOB pricing, shape or frame color options, RGB control specification, or OEM packaging, contact the sales team with your target quantity and destination port.
Reviews
There are no reviews yet.