Crystal Dual Color LED Bulkhead Light | Moisture Proof Oval Wall and Ceiling Lamp with Customizable RGB Ring
An oval crystal textured bulkhead light with a bright SMD2835 white core and a customizable colored ring around the edge. Moisture resistant PP construction suits both wall and ceiling mounting, making it a flexible accent fixture for bathrooms, balconies, corridors, and covered outdoor walkways.
| Power | 20W main white light plus 15W colored ring, dual circuit |
|---|---|
| Luminous Flux | 1600 LM |
| Light Source | SMD2835 LED chips |
| Housing Material | PP, polypropylene |
| Frame Color | White |
| Ring Color Options | Red, yellow, blue, green, purple, customizable per order |
| Overall Size | 270 x 143 x 75mm |
| Installation | Wall mounted or ceiling mounted |
| Environment Rating | Moisture resistant, suited to damp indoor and covered outdoor locations |
Product Views
Five Customizable Ring Colors
The outer ring runs independently from the main white light, so the accent color can be selected to match a space or brand scheme without changing the white light output.
Mounts on Wall or Ceiling
Wall Mounted
Fixes flat against a wall surface for corridor, stairwell, or exterior wall lighting, with the oval body sitting flush against the mounting plane.
Ceiling Mounted
Mounts flush to a ceiling for bathroom, balcony, or covered walkway lighting where an overhead fixture is preferred over a wall position.
Why This Fixture Works Well
Crystal Textured Diffuser
The faceted PP diffuser scatters light evenly across the surface, avoiding a single bright hot spot from the SMD2835 chips underneath.
Independent Ring Circuit
The 15W colored ring runs on its own circuit from the 20W white core, so the accent color can be used alone, together with the white light, or turned off separately depending on the switching setup.
Moisture Resistant Build
PP housing and a sealed diffuser suit bathrooms, covered balconies, carports, and other damp locations where a standard indoor fixture would not hold up.
Consistent Chip Type
SMD2835 chips are a widely available, well proven package, supporting stable color consistency across production batches.
Flexible Mounting
The same fixture body works on a wall or ceiling, reducing the number of SKUs needed to cover both installation types on one project.
Compact Oval Footprint
At 270 x 143 x 75mm, the fixture suits corridors and tighter wall or ceiling spaces where a large bulkhead light would look oversized.
Where This Fixture Is Typically Installed
- Bathrooms and wet areas: Ceiling or wall mounted white light with a colored ring for a soft night light effect.
- Balconies and covered outdoor walkways: Moisture resistant housing suits sheltered exterior locations.
- Hotel corridors and stairwells: Colored ring can mark floor levels or zones using different accent colors per area.
- Carports and covered parking: Wall mounted positioning provides general illumination with a visible color accent.
- Restaurants and bars: Ceiling mounted units in a matched color create ambient mood lighting in dining or lounge areas.
- Retail and hospitality branding: Ring color can be selected to match a brand palette across multiple fixture locations.
Frequently Asked Questions
Can the white light and colored ring be controlled separately?
The 20W white core and 15W colored ring run as a dual circuit, so depending on the wiring and switch setup they can typically be operated independently or together.
Can this fixture be installed outdoors?
It is built with moisture resistant PP housing suited to damp and covered outdoor locations such as balconies and carports. Confirm the specific IP rating with the supplier before specifying it for fully exposed outdoor use.
Can the ring color be customized beyond the standard five options?
Standard options are red, yellow, blue, green, and purple. Additional colors can be discussed for qualifying bulk orders.
Does it work on both walls and ceilings?
Yes, the same fixture body is designed for either wall mounted or ceiling mounted installation.
What is the housing made from?
The housing and diffuser are made from PP, polypropylene, chosen for its moisture resistance and durability in damp environments.
Requesting a Quotation or Sample
For MOQ confirmation, FOB pricing, ring color options, or OEM packaging, contact the sales team with your target quantity and destination port.
Reviews
There are no reviews yet.