50W COB LED Downlight — 8 Inch Recessed Ceiling Light, 4500LM

Model UD100 · COB LED Downlight

UD100 50W COB LED Downlight — 8 Inch Recessed Ceiling Light, 4500LM

A 50W COB recessed downlight built on the same aluminum-radiator platform as our UD-series: Φ200mm cut-out, ≥80Ra color rendering, and 90LM/W efficiency sized right for corridors, retail aisles and standard-height office ceilings that don’t need an 80W fixture overhead.

60W
Power
4500LM
Luminous Flux
90LM/W
Efficiency
≥80Ra
CRI
UD100 50W COB LED downlight, 8 inch recessed ceiling light with aluminum heatsink radiator Φ230 × H120mm
Product Features

Why this 50W downlight holds up on site

UD100 shares its aluminum radiator, PC/ALU reflector and glass lens with our higher-wattage models — scaled down to 50W / 4500LM for spaces that don’t need 80W but still need a fixture that won’t fade or overheat.

01

COB single-source chip

One continuous COB light-emitting surface for even beam distribution and minimal visible hotspots through the reflector.

02

Full aluminum radiator

Finned die-cast aluminum body pulls heat off the COB chip continuously, keeping the fixture inside its -20°C to +50°C rated range.

03

90LM/W efficiency

4500LM from a 50W input at AC85-265V, 50/60Hz — around 85% more efficient than an equivalent-output halogen downlight.

04

≥80Ra color accuracy

Available in 3000K, 4500K or 6500K CCT, all rated ≥80Ra so fabrics, signage and skin tones read true under the fixture.

05

Φ200mm concealed install

Spring-clip mounting into a Φ200mm cut-out for a flush, trim-free ceiling finish — matches standard 8-inch recessed openings.

06

15,000H rated life

Driver and chip run at 0.9/0.9 PF/DF, supporting a 15,000-hour working life under normal indoor conditions.

07

IP20 indoor rating

Built for dry indoor ceilings — hallways, lobbies, offices, showrooms — with simple wall-switch on/off control.

08

Glass + PC/ALU optics

Tempered glass lens over a PC/ALU reflector controls glare while sealing the COB chip against dust ingress.

Cross-Section

Five layers, one job: get light out, heat off

The way our engineers spec it — from the visible face cover down to the radiator that decides how long the fixture actually lasts.

01

ALU Face Cover

Anodized aluminum trim ring that sits flush with the ceiling and frames the light output.

02

Glass

Tempered glass lens seals the optical chamber, cutting glare and keeping dust off the reflector.

03

PC/ALU Reflector

Faceted polycarbonate/aluminum reflector shapes the beam and softens the COB chip’s point source.

04

COB Chip

Single chip-on-board light source rated 4500LM at 50W — the source of the 90LM/W efficiency figure.

05

ALU Radiator

Finned die-cast aluminum heatsink draws heat off the chip by convection, protecting lumen output over 15,000 hours.

UD100 downlight construction, ALU face cover, glass, PC/ALU reflector, COB chip and ALU radiator
Technical Datasheet

Full specification — UD100 50W COB downlight

Everything a procurement or lighting-design team needs to spec UD100 into a bill of materials.

ModelUD100
Light SourceCOB
Input VoltageAC85-265V, 50/60Hz
Power50W
Efficiency90LM/W
Luminous Flux4500LM
PF / DF0.9 / 0.9
CRI≥80Ra
CCT3000K / 4500K / 6500K
Size8″ / Φ230 × H120mm
Cut OutΦ200mm
MaterialAluminum + Glass
Packing SizeL620 × W500 × H260mm
IP RatingIP20 (Indoor)
InstallationConcealed / recessed, non-dimmable, wall-switch control
Working Life15,000 hours
Working Temperature-20°C to +50°C
Energy Saving~85% vs. halogen equivalent

* Specifications reflect standard production. OEM/ODM variants (dimmable driver, alternate CCT binning, custom finish) available on request.

UD100 LED downlight dimension diagram, cut-out 200mm, diameter 230mm, height 120mm

Dimensions at a glance

  • Cut-out diameter: Φ200mm
  • Outer diameter: 8″ / Φ230mm
  • Overall height: 120mm
  • Carton packing: L620 × W500 × H260mm
Why Choose Us

A manufacturing partner, not just a line item

We supply lighting distributors, contractors and hospitality fit-out teams who need consistent quality across container-sized orders — not just a single sample that looks good.

01

OEM / ODM ready

Custom CCT binning, driver protocol, face-cover finish and private-label packaging on the same UD100 platform.

02

Batch-tested output

Every production run is checked against the 4500LM / 90LM/W / ≥80Ra spec before it leaves the factory.

03

Engineered for lifespan

The aluminum-radiator-first design is why we can rate UD100 for 15,000 hours instead of quoting a marketing number.

04

Export-ready packing

Standardized L620×W500×H260mm cartons sized for efficient container loading and reduced in-transit damage.

05

Direct factory pricing

No middleman markup — wholesale and project-volume pricing quoted directly against your cut-out count and CCT mix.

06

Responsive technical support

Talk to the team that specs the driver, not a call center — for site issues, replacement parts, or a custom CCT run.

FAQ

Questions procurement teams actually ask

What makes UD100 different from the 80W UD58 and 60W UD64 downlights?

UD100 shares the same COB chip platform, aluminum radiator and Φ200mm cut-out body as UD58 (80W/7200LM) and UD64 (60W/5400LM), but is binned to 50W / 4500LM. It suits lower-ceiling or lower-light-level spaces that still need 90LM/W efficiency and ≥80Ra color rendering, at a lower running cost per fixture.

What is the cut-out size and overall dimension of the UD100 downlight?

UD100 has a Φ200mm ceiling cut-out. The fixture body is 8 inch / Φ230mm in outer diameter and 120mm in height, matching standard 200mm recessed downlight openings used in hotel corridors, retail ceilings and office grids.

Is the UD100 downlight dimmable?

The standard UD100 is a non-dimmable, wall-switch on/off fixture rated IP20 for indoor concealed installation. If your project needs a dimmable or emergency-driver version, contact us — we support OEM/ODM driver changes on request.

What color temperature (CCT) options are available for UD100?

UD100 ships in 3000K warm white, 4500K neutral white, or 6500K cool white, all rated ≥80Ra, so the same fixture body works for warm hospitality lighting or cooler task lighting in offices and retail.

How long does the UD100 downlight last and what is its operating temperature range?

UD100 is rated for 15,000 hours of working life and operates from -20°C to +50°C, with roughly 85% energy saving compared to an equivalent-output halogen downlight.

Can UD100 be customized for wholesale or private-label (OEM/ODM) orders?

Yes. UD100 supports OEM/ODM programs including custom CCT binning, driver/dimming protocol, face-cover finish and private-label packaging. Standard packing size is L620×W500×H260mm — contact us for MOQ and lead time.

Get a quote on UD100

Tell us your cut-out count, CCT mix, and destination port — we’ll turn around FOB pricing and lead time.

eason@uwinled.com

UD100 LED downlight / COB LED downlight 50W / 8 inch recessed downlight / Φ200mm cut-out downlight / commercial LED downlight manufacturer / wholesale LED downlight supplier / IP20 aluminum heatsink downlight / 3000K 4500K 6500K LED downlight

Leave a Comment

Your email address will not be published. Required fields are marked *