High-Brightness Moisture-Proof LED Light
Built for Wet, Dusty & Pest-Prone Spaces
This moisture-proof LED bulkhead light is built around SMD2835 chips, a PP housing and a built-in driver — no separate driver box to seal against moisture. It’s available in round or ellipse shapes, in a standard always-on version or with infrared/radar motion sensing, and finished in white, black or woodgrain to suit anywhere from a utility room to a hospitality corridor. Offered in 15W and 20W, with OEM/ODM support for importers and distributors sourcing a moisture-proof LED light manufacturer.
Datasheet at a Glance
Everything a buyer checks first — chip type, housing material, driver behavior and protection level — before requesting samples. Shape- and wattage-specific dimensions are listed further down.
Built for the Spaces a Standard Downlight Can’t Handle
SMD2835 Light Source
A widely used, cost-efficient SMD chip that balances brightness and reliability for utility and general-purpose lighting applications.
PP Housing
Polypropylene resists moisture, corrosion and most cleaning chemicals better than standard plastics — a common choice for fixtures rated for wet or washdown environments.
Built-In Driver
The driver is sealed inside the fixture body rather than mounted externally — one less connection point to protect from moisture ingress.
Round or Ellipse Shape
Two housing shapes on the same light engine platform, so a single spec sheet covers both aesthetic preferences without switching suppliers.
Standard or Motion-Sensing — Same Fixture Platform
Both versions share the same SMD2835 light engine, PP housing and built-in driver — the sensor version simply adds detection.
Always-On Standard Version
Switched on and off manually like a conventional fixture — the straightforward choice for spaces that need constant, predictable lighting such as stairwells with existing switching or continuously-occupied utility rooms.
Infrared / Radar Sensing Version
Built-in infrared or radar motion detection switches the light on automatically when someone enters the space and off after a set delay — useful for corridors, stairwells, garages and storage areas where lights are often left running unnecessarily.
Round or Ellipse Housing
Same light engine and protection level in either shape — choose based on the fixture layout your project calls for.
Frame Colors
White ships as standard on both shapes; black and woodgrain finishes are available for projects wanting a different look for corridors, spas, or hospitality fit-outs.
Wattage & Output Comparison
Both shapes are offered in 15W and 20W. Materials and frame color are consistent across the range — see below for shape-specific dimensions.
| Shape | Power | Lumens | Size | Material | Frame Color |
|---|---|---|---|---|---|
| Round | 15W | 1350LM | Φ162×H65mm | PP | White |
| Round | 20W | 1800LM | Φ218×H70mm | PP | White |
| Ellipse | 15W | 1350LM | 214×112×H65mm | PP | White |
| Ellipse | 20W | 1800LM | 270×143×H70mm | PP | White |
Black and woodgrain frame options available on request — confirm lead time impact with our sales team.
What You’ll Need for a Sourcing Decision
The details that usually come up between a first sample request and a container order. Exact figures depend on shape, finish and destination — confirm with our sales team for a formal quotation.
Samples
Pre-production samples available for testing and photometry verification prior to bulk order confirmation.
OEM / ODM
Custom frame color, sensor configuration and packaging branding available for private-label programs.
Lead Time
Typical production lead time runs from sample confirmation to shipment; exact scheduling depends on order volume, finish mix and season.
Packaging & Shipping
Export-standard carton packaging with drop-test protection; FOB/EXW/CIF terms available on request.
Where This Fixture Is Typically Specified
Anywhere moisture, dust or pests would shorten the life of a standard indoor-rated fixture.
Questions Buyers Usually Ask
What does “moisture-proof” mean on this fixture, and is there an IP rating?
The fixture is built to resist water exposure, dust ingress and pest entry through its sealed PP housing and built-in driver — the practical qualities most buyers are checking for when they say “moisture-proof.” Let us know your destination market and required certification, and we’ll confirm the exact IP rating and test documentation available for that configuration.
What’s the difference between the standard and sensor versions?
Both use the same light engine and housing. The sensor version adds built-in infrared or radar motion detection so the light switches on automatically when someone enters the space and off after a delay — useful anywhere lights are often left running by mistake.
Why PP housing instead of standard plastic or aluminum?
PP (polypropylene) holds up well against moisture, corrosion and most cleaning chemicals, which is why it’s a common housing choice for fixtures rated for damp or washdown environments, without the added weight and cost of a metal housing.
Can I get this fixture in a color other than white?
Yes — black and woodgrain frame finishes are available in addition to the standard white. Confirm your target quantity and finish mix with our sales team for lead time and pricing.
Do you support OEM/ODM and small trial orders?
Yes — branding, frame color and sensor configuration can be discussed for private-label programs. Contact our sales team with your target quantity and we’ll confirm MOQ, sample lead time and pricing.
What payment terms and trade terms are available?
T/T and L/C are commonly used, with FOB, EXW or CIF shipping terms depending on your destination port. Get in touch for a formal proforma invoice.
Request a Quotation for This Moisture-Proof LED Light
Reach out for the full datasheet, IP rating documentation, and FOB/EXW pricing by shape, wattage and finish.