LED Downlight · Model UD90
UD90 Adjustable Anti Glare LED Downlight
A COB recessed ceiling light with a rotatable lamp holder that tilts 0° to 30°, an anti glare reflector, and a finned aluminum radiator, built for concealed installation from 7W up to 24W.
Anti glare optics
Aluminum radiator
15000 hour life
UD90 technical data
Four wattage options share the same optical engine and body, so the fixture scales from accent lighting to general room lighting without changing the look of the ceiling.
| Power | Efficiency | Luminous flux | PF / DF | Size | Cut out |
|---|---|---|---|---|---|
| 7W | 80 LM/W | 560 LM | 0.5 / 0.7 | 2.5″ / Φ90 x H43mm | Φ70mm |
| 12W | 80 LM/W | 960 LM | 0.5 / 0.7 | 3″ / Φ110 x H55mm | Φ90mm |
| 20W | 80 LM/W | 1600 LM | 0.5 / 0.7 | 4″ / Φ140 x H65mm | Φ120mm |
| 24W | 80 LM/W | 1920 LM | 0.5 / 0.7 | 6″ / Φ170 x H80mm | Φ150mm |
Three details that set the UD90 apart
Every part of the fixture is built around one job: put clean, comfortable light exactly where the room needs it.
Rotatable lamp holder
The inner module tilts 0° to 30° inside the fixed trim, so a single downlight can wash a feature wall, highlight artwork, or point straight down, without cutting a new hole or repositioning the housing.
Anti glare design
A recessed COB chip sits behind a PC lens and reflector, which pulls the light source out of typical sightlines so the beam stays comfortable to look toward from across a room.
Aluminum radiator
A finned aluminum heat sink draws heat away from the COB chip in real time, which protects lumen output over time and supports the fixture’s rated 15000 hour working life.
What is inside the UD90
- PC ReflectorShapes and directs the beam while shielding the chip from direct view.
- PC LensDiffuses the COB output for an even, glare controlled beam.
- COB ChipSingle point light source rated at 80 LM/W across the range.
- ALU Face CoverHouses the rotatable module and sets the fixture’s finish.
- ALU RadiatorFinned heat sink that manages thermal load for a longer working life.
One design, four output levels
The 7W version suits accent and display lighting on a small cut out. The 12W fits hallways, bathrooms and bedrooms. The 20W is a common choice for living rooms, offices and retail floors. The 24W is sized for higher ceilings and larger commercial spaces where more lumens are needed from a single point.
Built for concealed indoor ceilings
Rated IP20 for dry indoor rooms, the UD90 installs into a false or concealed ceiling and reads as a clean, low profile circle once fitted. Its tilt function makes it useful anywhere a single fixture needs to do two jobs, general room light and directional accent light.
- Living rooms and hallways where light needs to wrap a corner or wall
- Feature walls, art, and display niches that need an angled beam
- Bathrooms, bedrooms and offices on the 7W or 12W sizes
- Retail, hospitality and lobby ceilings on the 20W or 24W sizes
UD90 LED downlight, answered
What is the beam adjustment range on the UD90 LED downlight?
The rotatable lamp holder tilts from 0° to 30°, so the beam can be aimed at a wall, artwork or worktop without relocating the fixture.
Is the UD90 downlight dimmable?
No. The UD90 is a non dimmable fixture controlled by a standard wall switch.
What color temperatures does the UD90 come in?
It is available in 3000K warm white, 4500K natural white and 6500K cool white, each with a CRI of 80Ra or higher.
What cut out size does each wattage need?
The 7W needs a 70mm cut out, the 12W needs 90mm, the 20W needs 120mm and the 24W needs 150mm.
Is the UD90 suitable for bathrooms or outdoor use?
It carries an IP20 rating, intended for dry, indoor, concealed ceiling installation, and is not suitable for outdoor or wet locations.
adjustable recessed LED downlight
gimbal LED downlight
COB LED downlight
rotatable LED downlight 0 to 30 degree
aluminum heat sink recessed downlight
LED downlight 7W 12W 20W 24W
concealed installation LED ceiling light
UD90 LED downlight
commercial and residential recessed lighting
Reviews
There are no reviews yet.